BRADBURY.

H4103ATL 4 TONNE FOUR POST CLASS 4 ATL ELECTRO-HYDRAULIC LIFT.

(LIFT SHOWN IS FOR INFORMATION AND VISUAL PURPOSES; WE SELL THE ENTIRE BRADBURY RANGE.)



Features: -

•Low maintenance costs

•Safe and reliable hydraulic operation complete with recessed radius plates and hydraulic shaker plates.

•Platform length 4295mm

•130mm low profile platform

•Anti tilt system

•Overload safety valve

•Descent control valve

•Pipe burst safety valve 24 V, low tension dead man controls.

Accessories: -

•Lighting kit (P40LK)
•Extended ramp kit for low ground clearance vehicles
•Drive through version available…

Technical data: -

Lifting capacity = 4000kg’s
Height = 130/1820mm
Between columns = 2370mm
Overall width = 2730/2815mm
Across platforms = 1930mm
Each platform = 565mm
Overall length = 4295mm
Overall height = 2340mm
Approach ramp = 900mmSR/405mmFF
Lifting full load (3phase 2.2Kw) = 50 SECONDS
Lowering full load (3phase 2.2 Kw) 45 SECONDS

3 PHASE OPTION: -

•Voltage = 400V, 50Hz, 3 phase and neutral
•Cable = Four wire plus earth
•Current = Fused at 15A
•Motor = 2.2Kw direct on line start
•Cable size = 2.5mm squared.

SINGLE PHASE OPTION: -

•Voltage = 230V, 50Hz, 1 phase
•Cable = Two wire plus earth
•Current = Fused at 30A
•Motor = 1.1kw direct on line start
•Cable size = 2.5mm squared.

1040/1070 CLASS IV, CLASS VII AND ATL BRAKE TESTERS

(BRAKE TESTER SHOWN IS FOR INFORMATION AND VISUAL PURPOSES; WE SELL THE ENTIRE BRADBURY RANGE.)



•Very latest Technology
•Upgradable to Automated Test Lane
•V.I. Programmable updatable
•Automated test sequence
•Tests can be saved on the PC
•Meets the very latest vehicle inspectorate requirements

The Bradbury 1040 and 1070 can be upgraded to a full test lane. The brake tester is simple to use with infra red control. The large colour displays, either 15” or 17” screen allows operator to complete brake tests easily and quickly.

UPGRADABLE TO BIKE MOT.

Technical Specifications (1040)

Power supply 3 x 400 V + N + PE / 50 Hz
Electronics PC compatible RS-232 Port
Display Monitor colour printer size DIN A4
Protection fuse 4A
Dimensions 2320 x 680 x 280 mm
Weight 400 kg
Min/Max lane 780 / 2200 mm
Load per axle 3 tonne
Power supply 3 phase 440 volt - 3 phase
240 volt for console - 1 phase
(Separate from 3 phase)
Friction rate Dry approx. > 0.8
Wet approx. > 0.6
Test speed 5 km/h
Motor power 2 x 4.6 kw
FLC 10A Fuse 40A

Technical Specifications (1070)

Power supply 3 x 400 V + N + PE / 50 Hz
Electronics PC compatible RS-232 Port
Display Monitor colour printer size DIN A4
Protection fuse 4A
Dimensions 2925 x 680 x 280 mm
Weight 450 kg
Min/Max lane 860 / 2800 mm
Load per axle 4 T
Power supply 3 phase 440 volt - 3 phase
240 volt for console - 1 phase
(Separate from 3 phase)
Friction rate Dry approx. > 0.8
Wet approx. > 0.6
Test speed 5 km/h
Motor power 2 x 5.5 kw
FLC 11.5A Fuse 40A

PLAY DETECTOR (RECESSED VERSION) : -

•Control by means of a hand lamp with integrated push buttons



•Pneumatic when you work with one plate only, the movements of the play detector must be very fast and forceful, something that is possible with an air valve only.

•Galvanized cover plate

•Full extension with approx. 40 cycles per vehicle.

•Frequency of movement of the play detector is adjustable between 0.5 and 2 Hz

•The play detector can be moved towards the centre of the lift or in a rotational movement.

LITECHECK 2 Headlight aligner : -



Specifications: -

•Laser positioning for easy alignment of vehicle

•Bradbury headlight aligner is for use in class 4 & 7 MOT, OPTL & ATL lanes.

Bradbury headlight aligners were specifically designed to meet the 2005 VOSA specification and therefore can be used in ATL applications.